Development of an MPS Distribution Station Jobsheet Based on Outseal PLC for Electropneumatic Control Learning
DOI:
https://doi.org/10.24036/jtein.v7i1.828Keywords:
Jobsheet; MPS; Outseal PLC; Electropneumatic; Vocational EducationAbstract
This study aimed to develop a jobsheet based on the Modular Production System (MPS) Distribution Station using an Outseal PLC for electropneumatic control learning in vocational schools. The study was motivated by the suboptimal use of MPS facilities and the absence of structured practical learning guidelines, which led to students’ difficulties in understanding the relationship between theoretical concepts and industrial applications. This research employed a Research and Development (R&D) method using the ADDIE model, limited to the development stage. The developed jobsheet was validated by three experts consisting of material and media validators. Data analysis was conducted using Aiken’s V to determine the validity level of the product. The results showed that the material aspect obtained a validity value of 0.78, while the media aspect obtained 0.82, both categorized as valid. Therefore, the developed jobsheet is considered feasible to be used as a learning medium for electropneumatic control systems in vocational education
Downloads
References
[2] D. C. Permana, R. Ferdiansyah, F. P. Safira, Z. T. A. Gumilang, A. J. Pangestu, and R. W. A. Rozak, “Revolusi Industri 4.0 dan Otomatisasi: Antara Produktivitas, Risiko, dan Etika Sosial,” KONTAN J. Ekon. Manaj. dan Bisnis, vol. 4, no. 1, 2025, doi: 10.59818/kontan.v4i1.553.
[3] A. Krause and L. Urbas, “Modular and active learning to support asynchronous learning in automation engineering,” ITHET 2014 - 13th Int. Conf. Inf. Technol. Based High. Educ. Train., 2014, doi: 10.1109/ITHET.2014.7155679.
[4] T. Herliand, “Professional Training of Future Skilled Workers in Professional (Vocational) Education Schools Based on Modular Ànd Competence Approach,” ???????? ?????? ????????? ??????????-????????? ?????? ???? ??????? ?????????? ??????????, vol. 5752, no. 2(19), pp. 18–23, 2019, doi: 10.32835/2223-5752.2019.19.18-23.
[5] S. Manesis and G. Nikolakopoulos, Introduction to Industrial Automation. Boca Raton, Florida, USA: CRC Press, Taylor & Francis Group, 2016.
[6] E. Endryansyah, B. Suprianto, P. W. Rusimamto, L. Anifah, and A. Wardhono, “Utilization of Automation Studio Software to Improve the Creative Thinking Abilities of Electrical Engineering Students in Designing Electropneumatic Circuits,” J. Eng. Educ. Transform., vol. 39, no. 1, pp. 180–192, 2025, doi: 10.16920/jeet/2025/v39i1/25123.
[7] Abadi, “Penerapan Human Machine Interface Berbasis Augmented Reality pada Sistem SCADA Modular Production System,” ELKOMIKA J. Tek. Energi Elektr. Tek. Telekomun. Tek. Elektron., vol. 11, no. 2, p. 285, 2023, doi: 10.26760/elkomika.v11i2.285.
[8] E. Abele et al., “Learning factories for future oriented research and education in manufacturing,” CIRP Ann. - Manuf. Technol., vol. 66, no. 2, pp. 803–826, 2017, doi: 10.1016/j.cirp.2017.05.005.
[9] S. Samnur, F. R. Bahaharuddin, and A. Nurdenirta, “Pengembangan Job Sheet Pada Mata Pelajaran Teknik Pengelasan Busur Manual Di Smk Negeri 2 Pangkep,” JoVIJOURNAL Vocat. Instr., vol. 1, no. 2, p. 41, 2022, doi: 10.55754/jov.v1i2.39605.
[10] D. Purwanto and E. Susanto, “Efektivitas Penggunaan Jobsheet dalam Pembelajaran Konstruksi Jalan dan Jembatan Kelas XI Desain Permodelan dan Informasi Bangunan (DPIB) di Sekolah Menengah Kejuruan Negeri 5 Bandung,” JPTS J. Pendidik. Tek. Sipil, vol. 3, no. 1, pp. 69–74, 2021.
[11] R. A. Candrasasmi, R. A. Yuanna, and D. Maryono, “Pengembangan E-Jobsheet Berbasis SKKNI pada Praktikum Pembuatan Susu Kedelai di SMKN 4 Garut,” JIPTEK J. Ilm. Pendidik. Tek. dan Kejuru., vol. 17, no. 2, pp. 90–103, 2023.
[12] M. P. Groover, Production Systems , and Manufacturing edition. 2015. [Online]. Available: www.pearsonglobaleditions.com
[13] Risfendra, Yoga Maulana Putra, H. Setyawan, and M. Yuhendri, “Development of Outseal PLC-Based HMI as Learning Training Kits for Programmed Control Systems Subject in Vocational Schools,” 5th Vocat. Educ. Int. Conf., pp. 506–511, 2023, [Online]. Available: https://proceeding.unnes.ac.id/veic/article/view/2883
[14] H. Setyawan, Sukardi, Risfendra, H. Effendi, and Syahril, “The Effectiveness of Outseal Programmable Logic Controller-based Training Kit to Improve Vocational High School Students’ Control System Skills,” Mimb. Ilmu, vol. 29, no. 2, pp. 218–227, 2024, doi: 10.23887/mi.v29i2.76065.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2026 JTEIN: Jurnal Teknik Elektro Indonesia
This work is licensed under a Creative Commons Attribution 4.0 International License.
